My mate bought a disco against my better judgement. He blew head gasket within weeks of ownership and opted for a new head. large pot of cash later blew gasket on new head a few weeks later. Had it skimmed. New gasket. Checked cooling, flushed rad and changed fan. just blown gasket again. any ideas before he cashes in his chips and takes a loan for a non LR motor.
Need to know what's broken and maybe how to fix it ? Post here
4 posts • Page 1 of 1
Take it back to the guy that put the new head on and ask him to do it properly FOC. If a new head was fitted and everything checked (i.e rad, stat, fan ) then there is no reason for it blowing again, if he didn't check the rad and change the stat then he didn't do it properly, main reason for heads going on tdi's is getting too hot usually caused by cooling problems and in rare cases pump and turbo turned right up. I've turned down a number of K series head gasket jobs because potential customer wouldn't pay for new stat and water pump and timing belt but all the ones I've done have never come back to bite me .
Do the job properly and do it once .
Who is online
Users browsing this forum: No registered users and 2 guests
Copyright © 2017 Yorkshire Off Road Club