Club Forum

Swivel Pin Grease

Need to know what's broken and maybe how to fix it ? Post here
User avatar
Steve L
Posts: 47
Joined: Sat Mar 16, 2013 3:13 pm
Location: Sherburn In Elmet
Full Name: Stephen Lancaster

Swivel Pin Grease

Postby Steve L » Wed Nov 19, 2014 7:46 pm

As my 90 only has one filler plug on the housing I understand they are filled with grease. My question is are they filled and sealed for life or do they require topping up periodically?
One seal is weeping slightly and has not been getting worse, the other seal is ok, so I assume there's plenty of grease in them.

User avatar
Matthews
Treasurer
Posts: 1273
Joined: Sat Jan 06, 2007 2:45 pm
Location: Leeds
Full Name: Matthew Sykes

Postby Matthews » Mon Nov 24, 2014 8:40 pm

There's a very small level plug just next to the lockstop , put it on full lock with filler plug removed and shine a torch down the filler plug , if you can see the molytex 1/3 to 1/3 way up the cv then it's ok , if not top it up .


Return to “Technical Info”

Who is online

Users browsing this forum: No registered users and 18 guests