Fitting Superpro bushes - where to grease?

[Jabba]

Just got some Superpro bushes for the panhard rod on my 90 as the ordinary bushes have worn PDQ.
There is a thing of grease in the kit and Superpro say to grease the bushes - but not where to put it.

Does it go between the metal tube and the poly bush?

Cheers, Dave

[varleym]

Dave

Grease wherever the rubber touches metal, primarily when you're pushing them into place.

Cheers

Mark

[Jabba]

Thanks Mark.

Found a good way to get the old bush out. Cut and filed a piece of old bike handle bar to size as it fits over the inner tube but inside the outer. A sharpened edge on one end, plenty of WD40 and hey-presto it pushes through cutting the rubber. No more burning.